New Wild Brewing Co. Kombucha Signs

This week we are putting the finishing finish on the new hanging signs that are going to hang outside the Wild Brewing Co. shop in Red Deer Ab. The four signs were cut out of 1″ HDU and then bonded together to make a pair of sturdy two sided signs. The bare HDU sign was first primed with two coats of high build Precision Board FSC-88B primer and then finished with a semi-gloss exterior acrylic paint. The color matching of the finished product against the sample product label turned out to be exceptionally good. The white letters, logo and trim were finished with One-Shot White Sign paint. Sign production efficiency was increased significantly when we used the Xedge Tools XCT518 long tapered and ran the job in a singel pass (as compared to multiple passes with progressively smaller bits) This is the fourth sign we have completed using this technique and its working very well for us.